How to pull the highway
Recently, "pulling highways" has become a hot topic, and many car owners and car enthusiasts are discussing how to correctly operate the highways to improve vehicle performance. This article will combine the hot contents of the entire network for the past 10 days to analyze the correct methods, precautions and related data for driving high speeds in detail.
1. What is high-speed pulling?
Pulling high speed refers to a driving behavior that eliminates the engine's carbon deposit and optimizes power performance by allowing the vehicle to run at high speed for a period of time. Especially for new cars or vehicles that drive at low speeds for a long time, pulling high speed is considered an effective maintenance method.
2. The correct way to pull the high speed
1.Choose the right section of the road: It is recommended to conduct it on highways or closed testing sites to ensure safety.
2.Speed up in stages: Do not step on the accelerator suddenly. You should gradually increase the vehicle speed to allow the engine to adapt to high speed.
3.Keep running at high speed: It is recommended to control the rotation speed at 3000-5000 rpm for 10-20 minutes.
4.Pay attention to gear switching: It is recommended to switch between 3-5 gears for manual transmission vehicles, and automatic transmission vehicles can use the Sport mode.
3. Things to note when pulling the highway
1.Vehicle status check: Ensure that the engine oil, coolant, tires, etc. are in normal state.
2.Safety first: Abide by traffic rules and avoid speeding.
3.New car running-in period: It is recommended to pull the highway after the running-in period is over for the new car.
4.Frequency control: Excessive pulling of high speed may damage the engine, and it is recommended to do it every 5,000 kilometers.
4. Common misunderstandings about pulling highways
The following are common misunderstandings about pulling highways in the online discussion in the past 10 days:
| Misconception | Correct explanation |
|---|---|
| Pulling the highway is driving | Pulling the high speed is to make the engine run at a high speed, not just to pursue the car speed. |
| New car must be pulled up the high speed immediately | The new car should complete the running-in period first (about 2,000 kilometers) |
| The longer the high speed, the better | 10-20 minutes each time is enough, excessive damage to the engine |
| All cars need to be driven at high speed | Vehicles that drive at high speeds for a long time do not need to be particularly high-speed. |
5. Actual effect data of pulling high speed
According to recent feedback from automotive forum users, the results statistics after pulling the highway are as follows:
| Effective indicators | Improve proportion | Duration |
|---|---|---|
| Power Response | 68% of users reported significant improvement | About 500-1000 kilometers |
| Fuel consumption performance | 42% user reports a decrease | About 300-800 kilometers |
| Engine noise | 35% of users report a decrease | uncertain |
| Shift smoothness | 57% of users reported improvement | About 300-500 kilometers |
6. Professional advice
1.Demand for modern vehicles is reduced: With the advancement of engine manufacturing technology, the necessity of pulling high speed has been reduced.
2.Alternatives: It is also effective to use fuel additives regularly and maintain good driving habits.
3.Electronic system impact: The ECU of modern vehicles will automatically adjust, and the effect of pulling high speed may not be as obvious as that of traditional vehicles.
7. Summary
As a traditional vehicle maintenance method, pulling high speed still has certain effects in specific situations. However, car owners should reasonably choose whether to perform high-speed operation based on the actual situation of the vehicle and the suggestions of professionals. The most important thing is to maintain good daily driving and maintenance habits, which is the best way to ensure vehicle performance.
No matter what method you choose to maintain your car, a safe and scientific attitude is always the first priority. I hope this article can help you understand the topic of pulling highways more comprehensively.
en
